Job Title: CNC Programmer
Reports to: Director of Engineering
FLSA Status: Hourly ($20 - $25 per hour, DOE)
Hours: 1st Shift- Varies (6:00 a.m. – 8:00 a.m. start times)
Location: Specialty Manufacturing, Inc. – 6740 Nancy Ridge Drive
San Diego, CA. 92121
Contact: Dalia Parlin
Specialty Manufacturing’s engineering department support production, quality and tooling. The
primary responsibility of a CNC Programmer is to design, build and program trim fixtures for the
3 axis CNC routers. Working with +-.002 to +-.005 tolerances.
Knowledge of SolidWorks, MasterCam, Haas 3 axis, DMS and Motion Master 5 axis routers a
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Must be an accomplished CNC programmer
Understand both vacuum and pressure forming tooling design
Be able understand and follow the design intent behind trim fixtures
Build jigs and fixtures as determined by engineering, quality or production
Responsible for good housekeeping practices
Perform other duties as may be periodically assigned
1. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
2. The requirements listed below are representative of the knowledge, skill, and/or ability required.
3. The requirements listed below are representative of the knowledge, skill, and/or ability required.
4. The requirements listed below are representative of the knowledge, skill, and/or ability required.
5. The requirements listed below are representative of the knowledge, skill, and/or ability required.
6. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
1. Minimum of 5 years CNC programming
2. Good communication, writing skills
3. Ability read blue prints
4. Ability to use CAD / CAM software
High school diploma or equivalent with a minimum of 5 years of experience in CNC programming.
Addition, CNC specific training and accreditation are a plus.
Ability to read and write in English
Certificates and Licenses:
N/A. Certificate/Licenses a plus
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Typical machine shop environment requiring safety glasses and select hearing protection.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to talk and hear. The employee is frequently required to sit and use hands to finger, handle, or feel. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception
and Ability to adjust focus.
This is not necessarily an exhaustive list of all responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other different tasks be
performed when circumstances change.