Title: Futaba Servo
Description: Change Deriction
Don Koval - August 6, 2004 03:16 AM (GMT)
Can I change the direction that the servo arm turns, buy reversing the wires????
Or will it go up in smoke ???
If you can" There is a Black,Red,and White.....Witch ones do you change??
Don
alvinonline - August 6, 2004 03:49 AM (GMT)
| QUOTE (Don Koval @ Aug 5 2004, 09:16 PM) |
Can I change the direction that the servo arm turns, buy reversing the wires????
Or will it go up in smoke ???
If you can" There is a Black,Red,and White.....Witch ones do you change??
Don |
Hi Don,
Nope, changeing the servo pig tail wires around will not reverse servo.
Might let the smoke out. :fuming:
In olden days before Surface Mounting Technology, we used to go inside the servo and reverse the wires going to the motor and the wires going to the pot and that would reverse it.
Not as many wires in servos now with most things soldered directly to board.
A servo reverser gizmo that plugs in between the servo and the reciever is still available I think. :unsure:
Don Koval - August 6, 2004 04:57 AM (GMT)
| QUOTE (alvinonline @ Aug 5 2004, 10:49 PM) |
| QUOTE (Don Koval @ Aug 5 2004, 09:16 PM) | Can I change the direction that the servo arm turns, buy reversing the wires????
Or will it go up in smoke ???
If you can" There is a Black,Red,and White.....Witch ones do you change??
Don |
Hi Don,
Nope, changeing the servo pig tail wires around will not reverse servo.
Might let the smoke out. :fuming:
In olden days before Surface Mounting Technology, we used to go inside the servo and reverse the wires going to the motor and the wires going to the pot and that would reverse it.
Not as many wires in servos now with most things soldered directly to board.
A servo reverser gizmo that plugs in between the servo and the reciever is still available I think. :unsure:
|
Thanks Alvin.. Well, I will just have to move the servo horn over to the right spot.
I put it in the wrong place,and the servo was backwards, and my ailerons were Flaps" Darn !!!!!!! :banghead: I hate it when I do that...... :wacko:
Don.............
Justin P. - August 6, 2004 11:35 AM (GMT)
Don,
Are you using a Y-Harness on the airlerons?? If you have one servo in channel six in the receiver and one servo in channel one, then just reverse the servo that is going the wrong way. If you have a y-harness then you will need a reverser.
Justin
Don Koval - August 10, 2004 07:37 AM (GMT)
| QUOTE (Justin P. @ Aug 6 2004, 06:35 AM) |
Don,
Are you using a Y-Harness on the airlerons?? If you have one servo in channel six in the receiver and one servo in channel one, then just reverse the servo that is going the wrong way. If you have a y-harness then you will need a reverser.
Justin |
Thanks Jusini, I am using a Y-Harness.... I moved the servo horn over to the right place. That turned the servo around, and it is working the right way now. :) Then I did a fix up on my little mess up :) All Is Well"
Don Koval - September 8, 2004 07:16 AM (GMT)
Ha Ha Ha !!!!!! Snick Snick :P It's Kind of Slow on the Forum :waveflag:
Tain't Nobudy Talkin :toot: