How do you adjust the nose gear so it is not so responsive (too sensitive)? The long arm on the nose gear that hooks to the push rod does not have any holes for adjustment. My transmitter is a basic 4 channel and does not have any adjustments on it except for trim. :huh: :(

Russell, you can drill a new hole further out on the arm on the nose gear to reduce sensitivity.

And/Or move the pushrod in a hole on the servo arm to reduce nose wheel movement. :yes:

Thankyou Tony, I"ll have to find my drill bits so I can drill a hole in the arm.

I'd be surprised if the pushrod isn't already at the outer end of the nosegear arm, but definitely move the pushrod in closer to the servo if you have the option there.

I have checked the nose gear arm and there is only one hole and it is at the end of the arm,so I'll have to move the push rod connector closer to the servo. Once again thankyou all for the help. :rolleyes: